Microencapsulated Red Phosphorus Master Flame Retardant For Thermoplastics

Microencapsulated Red Phosphorus Flame Retardant is an added high-efficiency environmentally friendly flame retardant. Kalshine uses a unique "ultrafine and stabilization modification" process to coat ultrafine phosphorus with inorganic compounds and organic resin microcapsules, achieving a perfect combination of flame retardant performance and safety performance.

Product Details



introduction:

 Microencapsulated Red Phosphorus Flame Retardant is an added high-efficiency environmentally friendly flame retardant. Kalshine uses a unique "ultrafine and stabilization modification" process to coat ultrafine phosphorus with inorganic compounds and organic resin microcapsules, achieving a perfect combination of flame retardant performance and safety performance.

 Moreover, its surface color changed from purple to off-white. The successful development of this product not only fills the blank of relevant domestic science and technology, but also takes a leading position among similar international products with its advanced technical level.       op10


Features:

1. Can maintain the original performance of the resin to the greatest extent, including mechanical properties, electrical properties, etc., especially to manufacture unique flexible flame retardant products. High efficiency, low consumption and low cost.

2. The amount of scientific red phosphorus flame retardant added can be closely combined with the resin to maintain material properties. The production process is simple and the mixing is uniform.

3. Scientific formula, the flame-retardant resin produced by the formula of red phosphorus flame retardant has less smoke and less toxic gas, reducing disaster losses.

4. High density, especially the flame retardant based on metal hydroxide with strong heat absorption performance, can achieve higher flame retardant performance




Application: This product is mainly used for thermoplastic resins such as PET (polybenzoate, cable material), PA (nylon), PE (polyethylene, cable material), EVA (ethylene + vinyl acetate copolymer, cable material), etc. Flame retardant for thermosetting resins such as epoxy, phenolic, unsaturated polyester, butadiene rubber, ethylene propylene rubber, fiber fabrics. A



parameter:

1. Appearance: light purple fluid powder

2. Particle size: D100≤20μm, D50≤6μm

3. Effective content of red phosphorus: ≥80%

4. Flash point: ≥3000C

5. Volatile matter: ≤1.0%

6. Bulk density: 0.6g/cm3

7. Moisture absorption: ≤1.2%


Second, the chemical properties:

1. The acid and alkali of the microencapsulated red phosphorus flame retardant are neutral and non-toxic

2. Capsule: red phosphorus (P4), molecular weight 123.85, crystal position ≥98.5%

3. Bag material: organic polymer materials and additives

4. Release amount of phosphine: <1PPM



Picture presentation:


微信图片_20200710133159


If you have any question,consult us!

Hot Tags: microencapsulated red phosphorus master flame retardant,phosphorus and nitrogen flame retardant,red phosphorus as flame retardant,phosphorus-based flame retardants for thermoplastics,inorganic phosphorus flame retardant,red phosphorus flame retardant mechanism,hyperbranched phosphorus flame retardants multifunctional additives for epoxy resins,nitrogen phosphorus flame retardant
Inquiry