Aluminum-casting Electric Heater

Kalshine provide high quality Aluminum-casting Electric Heater, Copper-casting Electric Heater, Far-Infrared Energy Saving Heater, high processing power, stable temperature, reliable quality, escort for your production.

Product Details

Aluminum-casting Electric Heater can be widely used in plastic machinery, die head, cable machinery, chemical industry, rubber, petroleum industry. Operating Temperature of Aluminum-casting Electric Heater is between 150~450 ℃ and the max barrel heating temperature: can reach 300℃,the load of Surface may 2.5-4w/cm2. Kalshine provide high quality electric heater, high processing power, stable temperature, reliable quality, escort for your production.

How to make a good electric heater.jpg

 

TYPE

Aluminum-casting Electric Heater6.jpg

Water-cooling Electric Heater

 

Aluminum-casting Electric Heater.jpg

Right Angle Aluminum-casting Electric Heater

Aluminum-casting Electric Heater8.jpg

Air-cooling Electric Heater

Aluminum-casting Electric Heater3.jpg

Aluminum-casting Electric Heating Ring

 

Aluminum-casting Electric Heater5.jpg

Flat Plate Electric Heater

 

Aluminum-casting Electric Heater9.jpg

Special-shaped Electric Heater

 

 

Series of Electric Heater

Series of Electric Heater.jpg

Order instructions:

Users should provide product drawings or samples, such as specifications, models, voltages, power, etc. without drawings or samples.

Instructions:

1) The working voltage shall not exceed 10% of the rated value;

2) The wiring part should be placed outside the heating layer and insulation layer, and the shell should be effectively grounded.

3) The cast aluminum, cast copper. cast iron heater should be placed in a dry place. If the insulation resistance is less than 1M due to long-term placement, it can be baked in an oven of about 200 degrees Celsius for 5-6 hours, and then it can return to normal.

 


Inquiry