1. Hot melt adhesive production system
It can handle hot melt adhesive from 5000cps (higher) without having to add a melting cooler.
The low viscosity of the hot melt adhesive can be made by adding a melting cooler.
Hot melt adhesive range: a) based on EVA, b) polyamides, c) polyester,
D) amorphous olefin copolymer, e) all kinds of adhesives.
2. Commonly used elastomers:
Styrene thermoplastic elastomer (TPS), such as SBS, SIS, SEBS, SEPS, etc.
Polyolefin thermoplastic elastomer (TPO, TPE-O, or TEO): separate mixed S-TPO
Dynamic sulfur type TPV (PP/EPDM)
Ester thermoplastic elastomer (TPE),
Polyamide thermoplastic elastomer (TPA)
3, polyurethane thermoplastic elastomer (TPU)
Typical process:
1) reaction kettle, cooling, crushing, twin screw melting, underwater pelletizing, centrifugal dehydration system.
2) measurement, twin-screw reactive extrusion, underwater pelletizing, centrifugal dehydration system.
4. Polyolefin:
1) high output PE, PP production, (1000kg/h above)
2) high melting finger and high output PP production (above 300kg/h)
5. Blending modified materials:
1) general small particles: PE, PP, ABS Color Master batch, pigments and other additives + EVA+
2) filling modification: PP+80%-90% calcium carbonate production
3) blending modification: PE, PP, PS+SBS PP, PA+EPDM
4) glass fiber reinforced: PP, PBT, ABS, PA, PC, POM, PPS, PET+ length glass fiber / whisker powder coatings
For additional information see:
